O painel frontal superior não abre

O painel frontal superior não abre mais do que o apresentado na ilustração. Não force a abertura mais do que isso.

Traseira do painel frontal superior

Insira os eixos de painel em ambos os lados do painel frontal superior nos orifícios do eixo.

Deslize para baixo as travas do painel frontal em cada um dos lados para as travar.

Baixe o painel frontal inferior para a sua posição original.

Feche lentamente o painel frontal usando ambas as mãos.

Remova o painel frontal superior e os filtros de ar.

Desconecte os chicotes de fios da presilha de fio e remova os chicotes de fios dos conectores.

Empurre o painel frontal inferior para cima até que este pare.

Desmonte a alheta (grande).

"Abra as 2 coberturas do parafuso e remova os 4 parafusos da grelha frontal.
(as coberturas do parafuso não são montadas de origem.)"

結果 (英語) 1:

the upper front panel opens no more than that shown in the illustration. Do not open more than that. rear



top front panel insert panel shafts on both sides of the upper front panel in the shaft hole.
slide down locks the front panel in each sides to hang.

download the lower front panel to its original position.

Slowly close the front panel using both hands.

remove the upper front panel and air filters.

disconnect harnesses the clip and remove wire harnesses from the connectors.

push the lower front panel up until it stops.

remove the tab (large).

"open the 2 screw covers and remove 4 screws from the front grille.
(Screw covers are not installed in origin.) "

結果 (英語) 2:

The upper front panel does not open more than shown in the illustration. Do not force the opening more than that.

Rear upper front panel

Insert panel shafts on both sides of the upper front panel shaft openings.

slide down front panel latches on each side to the lock.

download the lower front panel to its original position.

Slowly close the front panel using both hands.

Remove the top and front panel air filters.

unplug the harnesses of the wire clip and remove the harnesses of the connectors.

Push the lower front panel upwards until it stop.

remove the wingnut (big).

"Open the screw covers and 2 remove the 4 screws on the front Grill.(screw covers aren't assembled.) "

結果 (英語) 3:

The upper front panel does not open more than shown in the illustration. Do not force the opening more than that.

Back of the upper front panel

Insert shafts of panel on both sides of the upper front panel in shaft holes.

Slide down the latches on the front panel on each side to the curb.

Download the lower front panel to its original position.

Slowly Close the front panel using both hands.

Remove the upper front panel and the air filters.

Unplug the wire harnesses the wire clip and remove the wire harnesses connectors.

Push the lower front panel upwards until it stops.

Disassemble the vane (large) .

"Open the 2 covers the screw and remove the 4 screws of the front grille.
(The covers of the screw are not assembled of origin. "